Dani | SKAA Pro™ Transmitter
Dani | SKAA Pro™ Transmitter
Dani | SKAA Pro™ Transmitter
Dani | SKAA Pro™ Transmitter
Dani | SKAA Pro™ Transmitter
Dani | SKAA Pro™ Transmitter
Dani | SKAA Pro™ Transmitter
Dani | SKAA Pro™ Transmitter
Dani | SKAA Pro™ Transmitter
Dani | SKAA Pro™ Transmitter
Dani | SKAA Pro™ Transmitter
Dani | SKAA Pro™ Transmitter
Dani | SKAA Pro™ Transmitter
Dani | SKAA Pro™ Transmitter

Dani | SKAA Pro™ Transmitter

Regular price$249.99
/
Shipping calculated at checkout.
  • In stock, ready to ship
  • Inventory on the way


  • SKAA / SKAA Pro dual-mode transmitter featuring two balanced analog audio inputs and Burr-Brown input buffers and converters
  • Designed specifically for sending audio wirelessly from pro audio gear to SKAA speakers, SKAA headphones, and other SKAA receivers
  • Ideal for wirelessly connecting your analog or digital live sound mixer to front-of-house speakers, floor wedges, and headphones
  • Perfect for wirelessly connecting your DJ mixer/deck to your main speakers and/or your cue mix headphones (for example Dillinger Helix headphones)
  • Ideal for sending out wireless cue mixes from your DAW or mixing desk to your live room — to talent wearing Helix headphones, for example
  • Flip a switch and Dani works with consumer audio devices — transmit audio from any phone, tablet, iPad, computer, camera, music player — literally any device with a headphone jack or an audio line output

Part# PL5580/A0520

Specifications

  • 14 hour run time from a full charge using its internal rechargeable Li-Ion battery
  • Feed 4 SKAA speakers or headphones in SKAA mode (at 36ms latency)
  • Feed 2 SKAA speakers or headphones in SKAA Pro mode (at 19ms latency) … great for lightning-fast scratching and finger drumming
  • Two 1/4" TRS balanced/unbalanced line-level inputs with input impedance > 10k ohms
  • Inputs 1 and 2 can be used for Left / Right audio or to carry separate signals (eg. FRONT OF HOUSE on 1 and CUE MIX on 2)
  • Got XLR balanced outputs on your DJ Controller?  Perfect.  Just use two XLR-F to 1/4” TRS balanced cables to connect it to Dani
  • Legendary Burr-Brown input buffers
  • Legendary Burr-Brown analog to digital converters
  • Global volume control for all downstream devices.  Dani doesn’t scale your audio prior to wireless transmission — instead it remote controls the gain in the amplifiers in the downstream devices, delivering the best signal-to-noise ratio possible at all volume levels.
  • Mute/unmute control for all downstream devices
  • Thru jacks wired in parallel with the inputs so you can flow your signal to the next destination in addition to transmitting it out wirelessly by SKAA or SKAA Pro
  • Thrus are great for a hybrid system in which there are wired speakers in the front of the room and wireless speakers in the back of the room.  The output of your deck connects to Inputs 1/2.  Thrus 1/2 then feed your amps.
  • Thrus also enable you to run 2 Dani transmitters at the same time to double your wireless speakers at a gig.  Connect your mixer out to Dani A's Inputs.  Then connect Dani A's thrus to Dani B's inputs using two TRS balanced patch cables.
  • Dani can handle a wide range of line-level signals from the wimpy to the extreme.  Feed Dani from a meager headphone jack (3.5 mm phone or computer source) or hit it with +22 dBu of XLR balanced signal from the hottest DJ mixer.
  • Li-Ion battery is user-replaceable so your Dani won’t become a useless brick in the future
  • Dani charges from any USB power source (virtually any USB phone charger with a Type A jack will work) — use the included Type A to Type C cable to connect it to the Type C charging port on Dani’s rear panel
  • Fast charging is supported when a 2A (or better) capable USB power adapter is used
  • Dani can transmit and charge via USB at the same time
  • Fuel gauge tells you how much battery life is remaining — the last bar will start to slow flash when 45 min battery life remains
  • Auto powers off when the battery reaches empty
  • Up to 50-meter reliable indoor range with the included +2 dBi antenna (note that actual range will depend also on the antenna implementation in the receive-side device)

Links

  • For how-to Youtube videos, please subscribe to our channel click here
  • For more information on Dillinger Labs, click here
  • For product use diagrams, check out the Dani Owner's Manual

    Pairs well with

    Customer Reviews

    Based on 9 reviews
    100%
    (9)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    J
    John Markadakis
    Insanely awesome build quality and performance so far.

    These products are a hidden gem. The solution many people are looking for that don’t know about yet. I am super grateful for the team’s awesome customer service and they answered all of my questions via email, instagram, and the phone before and after my purchase. Will do business with them a gain and tell all of my industry partners.

    J
    Jeff

    The Future is here

    Living in Great times.

    A
    Andrew

    Very good. Allows me to connect my denon prime go to my soundboks gen 3 wirelessly. U really have to concentrate to discern any lag & even then, it's just a slight echo

    A
    A.T.

    Does exactly the job it promises in a robust system with no faffing around. Improvements could include printing some quick guides on the underside of the casing for use of switches and the power button, and inclusion of the +5db antenna in the kit. Next I want SKAA embedded in my Rode/Mackie mixing kit.

    B
    B.B.

    Good things are not cheap, cheap things are not good. A SKAA Pro with it’s Streetheart companion is not cheap but they are over engineered and very GOOD and are worth the money.

    You may also like